Home | Product & Service | Ask Amtecol | About us | New Information
Automotive Lubricants | Industrial Lubricants | Greases | Commitment | Research and Development | Amtecol contact

Gasoline Engine Oils | Diesel Engine Oils | Marine Engine Oils | Two Stroke And Four Stroke Motorcycle Oils | Two Stroke Engine Oils | Automatic Transmission Fluids | Automotive Gear Oils | Automotive Specialty Products

Duralife Pre-diluted 50/50 Antifreeze / Coolant is an  ethylene glycol/water based formulation. It is ready to use without adding water. This product  protects all metal surfaces within the cooling system including solder, copper , brass , steel, cast iron, and aluminum. The effectiveness of the coolant is improved by the anti-foam properties which works by preventing air bubbles from forming and interfering with the coolants ability to cool.

APPLICATIONS:
Duralife Pre-diluted 50/50 Antifreeze / Coolant is recommended for automotive and truck cooling systems and other industrial machines

PROTECTION

FREEZE-UP
Protection

BOILOVER
Protection

Duralife
Pre-diluted 50/50
Antifreeze/coolant

     -34°F
   

    +265°F
   

It meets the following performance requirements:
S ASTM D3306, D 4985, D4340
S SAE  J1034, J1941

BENEFITS:

S Constant cooling through improved heat exchange in the cooling system.
S The high alkalinity reserve protects metal parts like cylinder heads, water pumps and radiators against electrolytic corrosion.
S No effects on automotive rubber hoses, gaskets and synthetic parts.
S Clogging up of the radiator by rust particles and other types of sediment is eliminated.

TYPICAL CHARACTERISTICS
Test
Method
Typical Results
- PH  (50% vol. solution in water)
ASTM D1287
10.0 – 11.0
- Specific gravity @ 15oC (60oF)
ASTM D1298
1.07 – 1.14
- Freezing point, oC(oF)
ASTM D1177
-38 (-36)
- Boiling point ,oC(oF)(Undiluted)
ASTM D1120
108 (226)
The above characteristics are average values based on recent production. Minor variations, which do not affect product performance, are to be expected in normal manufacture.
WARNING:
Corrosion liquid! Harmful if takes internally. Keep out of reach of children and avoid contact with eyes. Do not discharge used liquid into drains.
Reference MSDS Number 12028 on website www.amtecol.com
Copyright © 2002 Amtecol.com. All Right Reserved.